Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in St. George?
Spring replacement in St. George typically costs $180 – $340 for one spring. Most doors in St. George have two torsion springs, and because a matched pair is almost always replaced together, a pair usually runs about $360 – $680. Those are typical estimated ranges for this market; the written estimate you receive sets the final price.
We’re a garage door specialist, not a general handyman outfit. That matters here because spring work is the one garage door job where getting the tension wrong is genuinely dangerous. Rosemont Garage Door Service handles spring replacement across St. George every week, and our technicians have up to 13 years of experience with the brands most commonly installed in local homes: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor.
Key takeaways:
- One spring: $180 – $340. A matched pair: about twice that.
- Most St. George doors use torsion springs mounted above the door, not extension springs along the tracks.
- Replace both springs at once when one breaks. The second spring has absorbed the same cycles and will usually fail soon after.
- Estimates are free, and the written estimate is the price.
- Call (866) 389-3687. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how spring-related pricing typically breaks down for a St. George home. The ranges below are estimates for the local market, not a quote. Your written estimate is what you pay.
| Line item | Typical estimated range |
|---|---|
| Spring replacement (one spring) | $180 – $340 |
| Spring replacement (matched pair) | $360 – $680 |
| General garage door repair | $150 – $600 |
| Cable repair (often done alongside springs) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if the door dropped hard) | $250 – $500 |
| Opener repair (if the opener was strained) | $120 – $320 |
| Opener installation (if the opener is at end of life) | $250 – $550 |
| New door installation (if the door itself is done) | $700 – $2200 |
What pushes a spring job toward the top of the range? A few things. Heavier doors, especially insulated double-car doors, need higher-cycle springs, which cost more than standard ones. If a cable is frayed or a drum is worn, that gets replaced at the same time because a fresh spring on a worn cable is a callback waiting to happen. And when a spring breaks, the door sometimes comes down hard enough to bend a track or crack a bottom panel. In that case you’re looking at spring work plus track or panel repair, and the total lands in the $400 – $600 range or higher depending on parts and access.
What keeps it toward the lower end? A standard single-car door, easy access in an open garage, and springs that failed cleanly without taking anything else with them.
What Affects Spring Replacement Pricing in St. George
- One spring or two. The biggest single factor. A one-spring quote and a two-spring quote are not the same job, and any estimate that gives you one number without telling you which one it’s for is worth a follow-up question.
- Torsion vs. extension springs. St. George homes are built almost entirely with torsion springs mounted above the door, which take more skill and a proper winding bar to replace safely. Older homes with extension springs run along the horizontal tracks and are priced a bit differently.
- Door weight and insulation. Local summers push a lot of homeowners toward insulated doors and insulated panels. Those doors weigh more, and the springs matched to them are heavier-gauge. Heavier springs cost more, and they’re also the reason a spring sized for a light door shouldn’t be swapped onto a heavy one to save a few dollars.
- Spring cycle rating. Standard springs are rated for a certain number of open-close cycles. Higher-cycle springs cost more up front and last longer. For a household where the garage is the main entry, the higher-cycle option tends to be the better value.
- Cables, drums and bearings. These wear together. If they’re near the end of their life, replacing them during the same visit costs less than a separate call later.
- Access and door condition. A garage with a low ceiling, a tight clearance or a door that’s out of balance adds labor time. So does a door that dropped and bent something on the way down.
Signs You Need Spring Replacement (and Not Something Else)
People often call us convinced they have a spring problem when the actual fault is a cable, a roller, or an opener logic board. Getting that diagnosis right the first time is the whole point of hiring a specialist.
What a broken spring usually looks like: the door won’t lift, or it lifts a few inches and stops. You may hear a sharp bang from the garage. On a torsion setup, you can often see a visible gap in one of the springs above the door. The opener might run but the door doesn’t move, or the door feels extremely heavy when you try to lift it by hand.
What points elsewhere: the door moves fine but the opener strains, reverses, or blinks a code (opener logic board, travel limit settings, or safety sensors). The door binds or scrapes on one side (track alignment or a bent roller). The door sags on one corner (cable or drum).
One safety note, and we mean this one. The springs above your door are under heavy tension, and a torsion spring holds enough stored force to cause serious injury if it releases unexpectedly. Please don’t try to wind, unwind or remove one yourself, and don’t cut a spring to relieve tension. That’s a trained-professional job with the right winding bars and the right technique. Our job is to make it safe again, not to talk you through doing it.
How Much Does Spring Replacement Cost in St. George Compared With Replacing the Door?
Spring replacement at $180 – $340 per spring is almost always the right call unless the door itself is at the end of its life. The comparison that matters is repair versus full replacement, and that’s a straightforward math problem most homeowners can work through themselves.
Ask three questions:
- Is the door and its panels in good shape? If the door is solid, straight, and not rusted through, springs and cables are wear items and worth replacing.
- Has the door needed repeated repairs? One spring failure is normal wear. A door that’s had a string of repairs in a short window starts to tilt the math toward a new door.
- Is the door original to the house and visibly tired? New door installation typically runs $700 – $2200 in St. George depending on size, material, and insulation. If the door is otherwise sound, that money is better spent keeping the current one running for years to come.
We’ll tell you honestly which side of that line your door is on. A spring replacement is a repair. A new door is an investment. We don’t confuse the two, and we don’t push the second when the first is the right answer.
How to Save on Spring Replacement
There isn’t a magic discount on spring work, but there are a few ways to keep the total down without cutting corners:
- Replace both springs together. It costs more than one spring in the moment, but the second spring is already at the same age and cycle count. Doing it once saves you a second labor charge when the other one goes.
- Get the written estimate before work starts. Our estimates are free, and we put the price in writing so there’s no surprise at the end.
- Bundle worn parts. If your rollers, cables, or bearings are near the end of their life, replacing them in the same visit costs less than a separate appointment later.
- Skip the “just replace the broken one” shortcut on a pair. It looks like the cheaper option. It rarely is.
- Ask about higher-cycle springs. If your garage is the main entry to the house, the longer-life springs often cost less per year of service than standard ones.
Want a straight answer on what your job will cost? Call (866) 389-3687 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can You Replace a Spring the Same Day in St. George?
Yes, in most cases a spring replacement can be done the same day you call. Spring replacement doesn’t require a permit in St. George, so there’s no wait for the city. The main variable is parts availability for your specific door and spring size, and we’ll tell you up front if something needs to be ordered.
Call (866) 389-3687. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening.
Brand-Specific Springs and What That Means for Cost
Springs aren’t brand-specific the way openers are, but the door and spring sizes they run on are. That’s where brand familiarity matters. Our technicians are certified to service eight of the industry’s most widely installed brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That means we know the common spring sizes, wire gauges and door weights those manufacturers used on the doors in St. George homes, and we match the replacement to the actual system instead of guessing. The right spring matched to the door is what prevents premature failure and callbacks.
Garage doors are our only trade. No HVAC, no plumbing, no roofing. All our training, tools and parts focus go into garage doors and openers. That’s the reason we can tell you, on the phone, whether your symptom sounds like a spring, a cable, or an opener logic board – and why the diagnosis tends to be right the first time.
What Sets the Final Price Apart From Brand? The St. George Climate
St. George is high desert, and that shapes garage door wear in ways that coastal or humid markets don’t see. Summer daytime heat in the St. George valley is hard on steel springs, and the extreme temperature swing between July and January works the metal differently than a mild climate would. Springs are the parts that flex with every cycle, and heat and temperature change shorten their service life. Homes here often have their garage facing the afternoon sun, which pushes the inside of the garage hotter than the outside air on a summer day.
The practical result for local homeowners: springs in St. George often need replacing on a shorter interval than the manufacturer’s cycle rating suggests. When we quote a replacement, we look at the door’s weight, cycle rating, and the exposure of the garage, so you get a spring rated for the job and the local conditions, not just a like-for-like swap that fails early.
That’s why we emphasize brand-matched expertise and correct tension specs on every job. A spring wound to the wrong tension fails early whether or not it’s the “right” spring. It’s also why we treat opener repair as its own discipline: when a spring failure has stressed an opener, we isolate the actual fault (motor, logic board, remote, safety sensors) instead of defaulting to full replacement. If your opener is genuinely at end of life, we’ll tell you, and opener installation runs $250 – $550. But we don’t sell a new opener when a repair is what you need.
If you’re in St. George and your door is struggling, that’s the whole point of calling a specialist. We diagnose before we quote.
FAQs – Spring Replacement Cost
How much does spring replacement cost in St. George?
Spring replacement in St. George typically costs $180 – $340 for one spring. Because most doors have a matched pair, a full pair replacement usually runs about $360 – $680. These are typical estimated ranges; the written estimate sets the final price. Call (866) 389-3687 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door in St. George?
Repair is almost always cheaper unless the door itself is at the end of its life. A spring replacement at $180 – $340 per spring is a fraction of new door installation at $700 – $2200. If the door is solid and straight, repair wins. If the door has had a string of failures or is visibly worn out, replacement starts to make sense. Call (866) 389-3687 and we’ll give you a straight answer either way.
How much does a broken garage door spring repair cost in St. George?
Expect $180 – $340 for one spring, or $360 – $680 for a matched pair. That’s the typical range for spring replacement in the St. George market. If the broken spring also bent a track or cracked a panel, the total moves into the $400 – $600 range or higher. Call (866) 389-3687 for an exact quote – estimates are free.
Can you come today for a broken spring in St. George?
Yes, same-day spring replacement is usually possible in St. George. There’s no permit required for spring work, so the only variable is parts for your specific door and spring size. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening.
Why replace both springs when only one is broken?
Because the second spring has absorbed the same cycles as the one that broke, so it’s usually close to failing too. Replacing both at once costs about the same as two separate visits later, minus the second labor charge. If your goal is the lowest total cost over the next few years, the matched pair is the cheaper option. Call (866) 389-3687 for a quote on your door.
Does St. George heat shorten spring life?
Yes, it typically does. St. George’s high-desert summers and wide seasonal temperature swings work steel springs harder than a mild climate would, so springs here often fail sooner than their rated cycle count suggests. That’s one reason we match the spring cycle rating to the door and the local conditions rather than doing a like-for-like swap. Call (866) 389-3687 to talk through your door.
Why Call a Specialist for Spring Replacement in St. George
Spring replacement is a focused repair, and it’s the one garage door job where a generalist’s shortcut can be genuinely dangerous. We do one thing: garage doors. Repair, opener repair, and installation, all from the same specialist team, so as your door moves from a spring repair today to an opener upgrade later to a full replacement when the door reaches end of life, you’re not handing it to a different contractor at each step.
That continuity is the reason our brand familiarity matters. When we know the door is a Clopay, an Amarr, a Wayne Dalton, or a Raynor, we know the spring sizes and tension specs it was built for. When it’s fitted with a LiftMaster or Chamberlain opener, we know the logic board and travel limit settings that keep it running smoothly. The right diagnosis, the right parts, and the right tension the first time.
Licensed and insured, with free estimates and upfront pricing. Call (866) 389-3687 to book your spring replacement estimate in St. George. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the St. George market as of 2026. Rosemont Garage Door Service offers free estimates – call (866) 389-3687.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Bryce Walsh"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Eric Hayes"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Mark Thompson